High-Class-Cabriolet of the future
With the A-Class in Berlin
CGI - the new direct injection
Head over to Mercedes-Benz IPTV
Copyright © 2008, Mercedes-Benz-Blog. All rights reserved.
Mercedes-Benz IPTV Weekly Show 03.06.2008
New spy pics of the 2010 S-Klasse FL
By
Adji

Two new spy photos depicting the 2010 facelifted S-Klasse surfaced today on the internet. They offer more intricate information about the changes which the luxury limo will suffer. The new headlights seem to feature LED technology;the radiator grille will be shaped in the E-Klasse style, adding more presence to the front end of the S-Klasse;the front spoiler and the bumper will be slightly retouched;the current exterior mirrors will be replaced by those seen on the GLK-Klasse;not so important changes in the rear end of the car, except for the apron and the rectangular muffler tips, inspired by those seen on the SL-Klasse FL..jpg)
Copyright © 2008, Mercedes-Benz-Blog. All rights reserved.
Daimler Heritage -- Topics for July 2008
By
Adji

Preview July 2008
July 21 – 25, 1898 – 110 years ago:
Daimler-Motoren-Gesellschaft conducts five days of testing in the Austrian Alps with a Daimler belt-driven car equipped with a Bosch low-voltage magneto ignition system. This electric ignition is subsequently fitted in several DMG trucks. The experience the company gains through these trials soon results in the disappearance of the hot-tube ignition system, which had been a characteristic feature of Daimler engines up to that time.
July 7, 1908 – 100 years ago:
Christian Lautenschlager drives a 140 hp Mercedes to victory at the French Grand Prix in Dieppe. Lautenschlager covers the 769.88 km race distance in 6 hours, 55 minutes and 43 seconds - equating to an average speed of 111.1 km/h. Victor Héméry and René Hanriot finish second and third respectively - both in Benz cars - whilst Otto Salzer sets a lap record speed of 126.5 km/h in a 140 hp Mercedes.
July 24, 1998 – 10 years ago:
The new in-line engine factory is officially opened on the premises of the original Daimler-Benz plant in Stuttgart-Untertürkheim. The production facility, which was built on the back of investment totaling DM 900 million, houses manufacture of state-of-the-art diesel engines with CDI (Common Rail Direct Injection) technology.
Other memorable dates:
July 29, 1888 – 120 years ago: The Imperial Patent Office grants Gottlieb Daimler patent DRP 46779, registered on April 15, 1889, for his “motorized fire pump”. The initial test design with a one-horsepower (0.74 kW) single-cylinder engine is followed by a four-hp (2.9 kW) two-cylinder version which causes a considerable stir on its presentation at the German Fire Brigade Conference in Hanover.
July 2, 1958 – 50 years ago: The wedge-pin door lock with two safety notches is registered as a patent. The innovative design, which prevents the door from flying open or getting stuck in the event of an accident, makes its debut in the
Mercedes-Benz product range in August 1959.
July 30, 1958 – 50 years ago: Mercedes-Benz Australia Pty. Ltd. is established in Port Melbourne to handle the import and sale of the brand's vehicles.
July 4 – 8, 1988 – 20 years ago: In Singen on the banks of Lake Constance, the new heavy-duty class (SK) from Mercedes-Benz is presented to the trade press. The lineup of refined and facelifted trucks comprises semitrailer tractors, platform trucks and construction site vehicles in the weight category upwards of a permissible gross weight of 17 tons.
July 1998 – 10 years ago: The Mercedes-Benz E-Class is now available with a world-first: Windowbags – additional airbags which considerably reduce the risk of head injuries in the event of a lateral impact.
Copyright © 2008, Mercedes-Benz-Blog. All rights reserved.
The Mercedes-Benz wedge-pin door lock
By
Adji
.jpg)
OFFICIAL PRESS RELEASE
*
Locking mechanism prevents car doors bursting open
*
New locks ensure stability of passenger compartment and thus survival space for driver and passengers
*
The first production vehicle to feature the wedge-pin safety lock was the Mercedes-Benz 220 (W 111 series) in 1959
Stuttgart, Jun 01, 2008 - Daimler-Benz patented what was to become a key element of passive car safety in 1958 – the wedge-pin door lock. It was introduced into a Mercedes-Benz production vehicle the following year. The innovative lock, featuring two safety detents, prevented vehicle doors from bursting open or jamming shut in the event of an accident.
In vehicles with older locks fitted, doors were known to spring open even as a result of relatively harmless collisions, often resulting in occupants being thrown out of the vehicle, since restraining or safety belts were not commonplace at the time.
Some time earlier, numerous experiments had resulted a little earlier in the first safety door lock, a pin lock, with which Mercedes-Benz reduced the risks considerably. This design was registered by the German Patent Office under No. 827 905 as “A locking mechanism, especially for motor vehicle doors” on April 23, 1949. In serious accidents, however, and particularly in the event of a rollover, the lock did not prevent doors from bursting open.
This problem was remedied by a new wedge-pin door lock featuring two safety detents. This lock design kept doors closed under all circumstances, thus ensuring complete stability of the passenger compartment and protecting the survival space for driver and passengers. After various design stages, the wedge-pin door lock was finally patented as “a pin lock, especially for motor vehicles” in July 1958. The wedge-pin lock made its debut in a production model in 1959 in the Mercedes-Benz 220 (W 111), the world’s first passenger car to feature a holistically designed safety body.
A combination of several innovations made the “tail-fin” – as this model series became more familiarly known – a milestone in passive safety. In addition to a rigid passenger cell, front and rear crumple zones and the wedge-pin door lock, these innovations also included a redesigned interior, in which all hazardous corners and edges had been removed. The 111 series was therefore the world’s first passenger car with an integrated safety body.
Innovations such as these eventually led to the current forward-looking integrated safety concept of Mercedes-Benz. This concept for the first time establishes an interrelationship between aspects of passive and active safety – marking a further significant step on the road to accident-free driving..jpg)
.jpg)

Copyright © 2008, Mercedes-Benz-Blog. All rights reserved.
1888: Gottlieb Daimler files patent application for first gasoline-powered fire-fighting pump
By
Adji
.jpg)
OFFICIAL PRESS RELEASE
*
Clear superiority over steam-powered pumps
*
Performance continually raised
*
Positive response from a number of countries
Stuttgart, Jun 01, 2008 - The gasoline-powered fire-fighting pump, invented by Gottlieb Daimler and the subject of a patent application filed with the Imperial Patent Office in Berlin on July 29, 1888, attracted worldwide attention in next to no time.
Gasoline engine by Daimler, piston pump by Kurtz
Gasoline and fire – two elements which firefighters were unable to reconcile for a long time. Back in 1910, the fire brigade commissioners still disagreed as to whether the gasoline engine was suitable for driving fire-fighting vehicles or not – despite the fact that they had been using gasoline engines for some 20 years at the time, not to drive vehicles, though, but to drive pumps.
It is generally assumed that it was bell-founder and fire-fighting pump manufacturer Heinrich Kurtz who gave Gottlieb Daimler the idea of placing his gasoline engine at the service of fire brigades. Be that as it may, it was Kurtz who had produced the castings for Daimler’s first internal-combustion engine two years earlier, and who now supplied the fire-fighting appliance with piston pump for which Daimler made an engine available – initially a one hp single-cylinder unit.
Kurtz was perfectly familiar with the fire brigades’ problems, knowing that the steam-powered pumps customary at the time required about a quarter of an hour’s heating before they were operational. In order not to have to idly watch the fire wreaking havoc during this time, the fire brigades carried along gas-powered extinguishers, spraying water into the flames under carbonic-acid pressure. A gasoline engine, by contrast, was capable of being put into operation immediately and with much greater effect.
In his turn, Gottlieb Daimler was gladly prepared to open up new fields of application for his internal-combustion engine. Only a small additional transmission was required to adapt the high-speed single-cylinder engine to Kurtz’s piston pump which, in its turn, reached its highest efficiency at 180/min. Gottlieb Daimler was granted a patent – No. 46779, class 59 – for his engine-driven fire-fighting pump on April 15, 1889.
Output boosted to up to ten hp
No invention, however well devised, cannot be improved upon. Daimler’s engine-driven fire-fighting pump may have been capable of holding its own in competition with any contemporary fire-fighting appliance, but there was no good reason for being content with an engine output of just one hp. As early as the 13th German Fire Brigades’ Convention in Hanover the same year, Daimler displayed a more powerful engine-driven fire-fighting pump, now featuring a twin-cylinder engine with as much as four hp (2.9 kW).
In the following years, Daimler boosted the output of his engines up to ten hp (7.4 kW). And as early as 1892, his six hp (4.4 kW) pump proved itself in a large fire in Cannstatt where it did five hours of reliable service in fighting the fire in a factory producing bed feathers. Its technical data caused quite a stir: it sucked water from a depth of five meters and pumped it through a 150 meter long pressure hose 20 meters high into the roof. This appealed to the professional fire brigade of Erfurt, which acquired the fire-fighting pump at a price of 5610 marks in 1896. In Erfurt, the pump continued doing reliable service for another 25 years.
The fact that the first engine-driven pumps were limited in their capacity was attributable less to the engines than to the pumps. It was not before 1909 that high-speed centrifugal pumps were developed, making better use of the engine output and pumping the water jet twice as high into the air.
Worldwide attention
Daimler was perfectly convinced of the trend-setting nature of his invention. As early as 1892 he left no stone unturned in his endeavors to spread the news of his engine-driven fire-fighting pump throughout the world. In that year, he displayed a unit with six hp (4.4 kW) twin-cylinder engine first in St. Petersburg, then in Leipzig, Munich, Florence and Milan. In 1893, Daimler’s engine-driven fire-fighting pump was exhibited at the World Exposition in Chicago.
A Daimler fire-fighting pump was also shown at the first British “Horseless Carriage Exhibition” in Tunbridge Wells in 1895. Gottlieb Daimler had sent it to Evelyn Ellis who, together with Frederick R. Simms, managing director of Daimler Motor Syndicate Ltd., proudly presented it to a stunned public.
.jpg)
.jpg)
Copyright © 2008, Mercedes-Benz-Blog. All rights reserved.
1898: Daimler-Motoren-Gesellschaft tests the low-voltage magneto ignition
By
Adji

OFFICIAL PRESS RELEASE
*
Testing on hill climbs and in freight transport
*
Bosch magneto ignition replaces Daimler’s hot tube ignition
*
New ignition technology proves itself in racing
Stuttgart, Jun 01, 2008 - This trial run marked the beginning of a new era in engine technology at Daimler-Motoren-Gesellschaft (DMG): up until then, all automobiles of the Stuttgart brand had been equipped with the hot tube ignition which Gottlieb Daimler had invented for the high-speed gasoline engine in 1883. But the brilliantly simple system soon would be unable to cope with the increasingly higher speeds of the new engines.
And so the new generation of electric ignition developed by Robert Bosch, the electrical engineering pioneer from Stuttgart, came at exactly the right time in 1898. Daimler had one of his belt-driven cars equipped with Bosch’s low-voltage magneto ignition and tested the vehicle for five long days in the Austrian Alps in July 1898.
DMG also installed electric ignition in a few trucks for testing purposes. The results of the journey through the Alps and the truck tests were convincing: the Phoenix cars introduced in 1897, with outputs of four hp (2.9 kW) and six hp (4.4 kW), were being sold by DMG with the low-voltage magneto ignition as early as fall 1898.
From experiment to large-scale production
Electric ignition of mixtures of gas and air had been discovered over a hundred years before Bosch’s low-voltage magneto ignition: in 1777 Alessandro Volta ignited marsh gas with an electric spark. However, the method was not really ready for practical, large-scale use in the automobile until almost the turn of the twentieth century.
Several inventions paved the way for the modern magneto ignition: in 1801 the French road construction engineer Philippe Lebon d’Humberain took out a patent on a gas engine with electric ignition, but did not build this machine. In 1807 the Swiss politician and inventor Isaac de Rivaz considered firing an internal combustion engine by a method similar to Volta’s pistol. Etienne Lenoir developed his gas engine in 1859 and was issued a patent for it in 1860. Ignition was already effected by a sparkplug consisting of two platinum wires insulated with porcelain: this was the archetype of the buzzer ignition based on the Ruhmkorff coil. Later, Carl Benz would rely on a variant of the buzzer ignition.
In 1876 Nikolaus August Otto developed his four-stroke engine which had a flame ignition with slide valve. Siemens was working on an electric ignition for the Otto engine in 1877, but only the magneto-electric ignition with impulse coupling, developed by Otto himself in 1884, attained maturity.
The Viennese machinist Siegfried Marcus already came very close to the future magneto ignition with his electric low-voltage contact-breaker ignition. Patented in 1883, the ignition worked with a movable center electrode in the cylinder; the ignition current was produced by a floating armature.
Daimler banks on the hot tube
Gottlieb Daimler and Wilhelm Maybach elected to take a very different route when they built the first high-speed engine in 1883. The hot tube ignition was regarded as the most important innovation of their engine. It ensured reliable ignition and made the desired increase in engine speed possible versus the Deutz gas engines. The first experimental engine managed as much as 600 rpm, appreciably more than the maximum 120 rpm for gas engines until then.
A key advantage compared to Otto’s flame ignition was the elimination of controlling parts: the hot tube, open towards the engine, was connected with the combustion chamber of the cylinder by a duct. A burner kept the tube, whose outer end was sealed gas-tight, red-hot. On each compression stroke a part of the mixture was forced into the tube by compression and ignited by the heat. Daimler’s first motorized carriage of 1886 also had an engine with hot tube ignition.
Bosch and the ignition
In his “Workshop for Precision Mechanics and Electrical Engineering” opened in 1886, Robert Bosch constructed a magneto ignition for use with stationary engines in 1887. This magneto-electric impulse coupling ignition enabled engine speeds of as much as 300 rpm. A wound armature oscillated between magnets and induced a current in the armature winding. At the moment ignition took place in the combustion chamber of the cylinder, this current was transformed by a mechanical impulse coupling control into a spark that ignited the mixture.
Bosch improved Otto’s solution in several steps. Among other things he adopted powerful U-shaped magnets such as employed by millers. In 1897 – Bosch produced the 1000th magneto ignition with oscillating armature in that year – the first successful tests were conducted to install the magneto ignition in a motor vehicle.
But the key to the future of the magneto as standard ignition device in the automobile was the introduction of an oscillating sleeve which permitted the armature between the magnets to remain at rest. The idea for this modification came from mechanic Arnold Zähringer, who worked for Bosch since 1890 and later became plant manager in Stuttgart.
With this new sleeve design, Bosch was able to make the magneto impulse coupling ignition ready for use in motor vehicles. Further steps in the development of the low-voltage magneto ignition were the revolving armature (1900) and finally the revolving sleeve (1901). The Bosch high-voltage magneto ignition of 1902 built upon this last evolutionary stage.
Demonstrations for Daimler and Benz
In 1898 Robert Bosch presented the new ignition to potential customers including the automotive pioneers Gottlieb Daimler and Carl Benz. Daimler recognized the innovative achievement embodied by this solution and decided to subject it to a lengthy test under the less favorable conditions of an Alpine tour. The test in Tyrol in July 1898 lasted five days. Afterwards, and following further testing in DMG trucks, the decision was taken to replace the hot tube in Daimler automotive engines as soon as possible with the Bosch low-voltage magneto ignition with oscillating sleeve.
The Phoenix car series (models with four-hp two-cylinder engine and six-hp four-cylinder engine) already featured the new ignition as of fall 1898. The first Mercedes model series of 1900/1901 then used the low-voltage magneto impulse coupling ignition in all units. The same goes for the Mercedes Simplex models of 1902 and 1903 as well as the Mercedes Simplex and the four-cylinder DMG models from 1904 to 1910.
The only exception was the 55 hp Mercedes built from 1907 (from 1909 this model was called 31/55 hp Mercedes), which had a dual magneto and battery ignition. This dual ignition was also used in the DMG six-cylinder models in the years 1907 to 1911.
Racing successes and the road to high-voltage ignition
The Bosch low-voltage magneto ignition proved its worth in the automobiles of Daimler-Motoren-Gesellschaft in everyday operation, jut as it did in competition driving. The first Mercedes which took the winner’s laurels in three French races in 1901 and scored further victories in that same year attained legendary status.
At Bosch, work on the next generation of ignition technology meanwhile was in progress: the high-voltage magneto ignition with sparkplug introduced in 1902 reduced the number of mechanical parts especially in the combustion chamber and made even higher engine speeds possible. Bosch delivered the first high-voltage magneto ignition to a reliable partner on September 24, 1902: to Daimler-Motoren-Gesellschaft. The magneto ignition remained the most frequently used system in automobiles well into the 1930s. It was finally superseded by the battery ignition which emerged in the 1920s..jpg)
.jpg)
.jpg)
.jpg)
Copyright © 2008, Mercedes-Benz-Blog. All rights reserved.
Mercedes-Benz Delivers 300,000 Units of the New C-Class in the Model’s First Sales Year

OFFICIAL PRESS RELEASE
*
Mercedes-Benz C-Class worldwide market leader since the beginning of the year
*
Sedan and station wagon are thrilling customers with a striking design featuring two different front ends, great agility, and new safety technology
*
BlueEFFICIENCY models lower fuel consumption by as much as 12 percent
*
New CLC as attractive entry-level variant to the Mercedes-Benz coupe family, at European dealers from June 2008
Stuttgart, Jun 02, 2008 - In the year since its market launch, the new Mercedes-Benz C-Class is continuing the success story of the predecessor model: more than 300,000 customers have purchased either a sedan or station wagon variant of the new model since it’s official introduction on March 31, 2007. “The sedan got off to an excellent start, and since its premiere at dealerships at the end of last year, the new C-Class station wagon has also been enjoying high popularity,” says Dr. Klaus Maier, Executive Vice President Sales and Marketing Mercedes-Benz Cars. “Both models, in fact, have posted growth rates of 70 percent on the corresponding periods from the prior year since their respective launches. As a result, the new C-Class has been the worldwide leader in its market segment since the beginning of 2008.”
German customers also are very enthusiastic about the new C-Class: according to Germany’s Federal Motor Transport Authority, the model was once again the top-selling vehicle in the mid-range segment in April. The most important market for the C-Class is Germany which accounts for 25 percent of total sales, followed by the U.S., UK, Italy, and South Africa. A total of 290,000 C-Class sedans from the 204 Series have been sold worldwide since market launch in the spring of 2007, and 25,000 customers have taken delivery of a new C-Class station wagon since that model variant was introduced in December.
A particularly successful feature of the new C-Class is the clear optical differentiation between the model’s three equipment lines. “In the first year of sales, one out of every two C-Class customers in Germany chose the Avantgarde line and in other core markets the share of total sales sometimes is even higher,” says Maier. “The response of our customers to the sporty design of the C-Class Avantgarde even exceeded our expectations. This new product strategy makes the vehicle very attractive to the most diverse customers within the heterogeneous C-Class customer base, and it also enables us to win over new customers to the Mercedes-Benz brand.”
Along with the new model’s distinctive design, C-Class customers are also attracted by the vehicle’s even more dynamic chassis, which features a selective damping system that also offers great comfort. Other major selling points include a further refined telematics system with Bluetooth, and a new Linguatronic voice-command system. In addition, the station wagon takes the trademark strengths of the sedan - including safety, agility, and comfort - and combines them with a significant increase in spaciousness and versatility. With maximum cargo capacity of 1,500 liters, the new station wagon offers more space than any other premium station wagon in its segment. Given all these attributes, it’s not surprising that the C-Class station wagon was also the top-selling model in its segment in Germany last April.
The new C-Class model series has won numerous German and international awards since its premiere. For example, the C-Class sedan easily beat out its competitors in Germany’s largest survey for the most popular automobile in January 2008, winning this year’s prestigious Gelbe Engel award presented by Germany’s ADAC automobile association. In addition, readers of AUTO BILD magazine voted the C-Class Germany’s most attractive sedan, while the publication auto motor und sport crowned it the most attractive mid-range model. What’s more, 350,000 participants in Europe’s largest Internet vote chose the C-Class for the 2007 “Carolina Internet Auto Award” as the most popular car in Europe. Meanwhile in the UK, the C-Class was named “Executive Car of the Year” by Top Gear magazine.
Mercedes-Benz offers six four-cylinder and seven six-cylinder engine variants for the C-Class, as well as the C 63 AMG. About one-third of the sedan model’s customers worldwide have opted for the C 220 CDI, while 20 percent have purchased a C 200 Kompressor. The C 220 CDI is also the vehicle of choice for around half of the station wagon model’s customers. 75 percent of all C-Class station wagons sold around the world are diesel engine versions.
Mercedes-Benz expanded the C-Class sedan line-up in the spring of 2008 by adding particularly fuel-efficient BlueEFFICIENCY models: fuel consumption in the C 180 KOMPRESSOR and C 200 CDI is 12 percent lower in the BlueEFFICIENCY versions, with no sacrifices in terms of the high level of comfort and outstanding safety features so typical of Mercedes-Benz vehicles. The C 200 CDI (100 kW/136 hp) consumes just 5.1 liters of fuel per 100 kilometers in the BlueEFFICIENCY version, while the C 180 KOMPRESSOR (115 kW/156 hp) requires 6.5 liters of premium gasoline to travel 100 kilometers. These consumption figures correspond to emissions of 135 and 156 grams of carbon dioxide per kilometer, respectively.
Mercedes-Benz will also begin offering a third C-Class BlueEFFICIENCY model at the end of 2008: the C 350 CGI, featuring gasoline direct injection. This vehicle’s six-cylinder engine will consume about ten percent less fuel than the conventional sedan with the current V6 engine. The C 350 CGI will thus offer a combination of responsive power, agility, safety, fuel economy, and environmental compatibility that is unique in its vehicle segment.
For their new BlueEFFICIENCY models, Mercedes engineers used potential from all areas of development. The aim was not only to further decrease weight, drag, and rolling resistance, but also to more efficiently organize the new sedans’ energy management system. As an added feature, BlueEFFICIENCY models are equipped with a brand-new cockpit shift display that informs the driver when to shift gears in order to achieve maximum fuel efficiency. Experience gained with the Mercedes-Benz “ECO training” program shows that an economical and energy-conscious driving style can result in fuel savings of as much as 15 percent - without giving up any driving pleasure.
The new Mercedes-Benz C-Class sedan and station wagon are the first cars in their market segments to come with an environmental certificate. By issuing this certificate, the TÜV Süd Management Service GmbH technical inspectorate company has confirmed the environmentally responsible development of the sedan, which boasts further advances across the entire vehicle lifecycle in key areas including fuel consumption, exhaust gas emissions, and the materials used in its manufacture. Mercedes-Benz is the only automaker worldwide to have received this demanding environmental certificate.
The new CLC sports coupe will arrive at dealerships in Western Europe in June 2008. Among other things, the model series will offer customers an attractive entry-level variant to the Mercedes-Benz coupe family. The CLC’s sporty appearance clearly sets it apart, as the vehicle’s front and rear were completely redesigned in keeping with the ultramodern Mercedes-Benz design idiom. The CLC also meets the high standards for safety, comfort, environmental compatibility, and functionality that are a hallmark of Mercedes-Benz. The model’s technical highlights include an all-new direct steering system for even greater agility when cornering, state-of-the-art infotainment systems with a color display, and a more powerful four-cylinder engine that now delivers 135 kW/184 hp for the CLC 200 Kompressor.
The CLC is the successor to the C-Class sports coupe, which has been purchased by approximately 320,000 motorists around the world since 2001. The majority of these customers were new to Mercedes-Benz. With its rate of approximately 70 percent new customers, the sports coupe is a very successful model in the Mercedes-Benz product offensive. In addition, the two-door sports car has succeeded in keeping established customers loyal to the Mercedes-Benz brand, and over 40 percent of those who purchased it subsequently bought an even larger Mercedes-Benz model.
C-Class sedans are produced in Germany at Mercedes-Benz plants in Sindelfingen and Bremen. They are also built in East London, South Africa, and have been manufactured in Beijing, China, since March 2008 as well. The station wagon is produced exclusively in Bremen, and the new CLC is manufactured at Mercedes-Benz’ Juiz de Fora plant in Brazil.
Copyright © 2008, Mercedes-Benz-Blog. All rights reserved.


